Hanger clamp for flexible catenary hangers/droppers with thimble.
Depending on the thimble used and the configuration chosen this clamp is suitable for non-conducting, conducting and spark-free conducting hangers.
| Title | Material | Screw and nut | Dropper wire cross-section (mm²) | Messenger wire cross-section (mm²) | Contact wire cross-section (mm²) |
| HKL-01.1 | Cu-ETP | M10, A2 (A4) | 10, 12, 16 | 25 – 150 | 80 – 150 |
| HKL-01.2 | CuNi2Si | M10, A2 (A4) | 10, 12, 16 | 25 – 150 | 80 – 150 |
The connection between aluminium messenger wires and copper jumper wires is very problematic. If an electrically conductive liquid like condensate or general humidity meets a connection of copper and aluminium, an electrochemical reaction forming a contact element....
Our fully automated checkpoint inspects the condition of the carbon brushes and the contact pressure of the current collectors on trolleybuses – every time they pass through – by means of 3D laser scanning and load cells.
Our fully automated checkpoint inspects the condition of the carbon brushes and the contact pressure of the current collectors on trolleybuses – every time they pass through – by means of 3D laser scanning and load cells.
Our fully automated checkpoint inspects the condition of the carbon brushes and the contact pressure of the current collectors on trolleybuses – every time they pass through – by means of 3D laser scanning and load cells.
Our fully automated checkpoint inspects the condition of the carbon brushes and the contact pressure of the current collectors on trolleybuses – every time they pass through – by means of 3D laser scanning and load cells.
The FLH-02.7 is KRUCH’s new standard hanger solution for suspending copper contact wires on aluminum messenger wires, which are frequently used in the United Kingdom.
Over the past few years, our HKL-02 hanger clamp for flexible hangers without thimble has been installed & used by more than 30 international customers in the railway and tram industry. One of the advantages of our HKL-02 is its simple and quick installation.
HKL-02, our hanger clamp without crimping or crimp sleeve, kicked off a real revolution upon its entry onto the market. Even though precisely this initially drew some sceptical looks, HKL-02 has numerous reputable fans today and has been enjoying more and more popularity in recent years.
On the 18th September it is time again. The InnoTrans 2018 starts in a new round. Of course, the KRUCH team is once again a guest at the leading international trade fair for traffic technology this year!
In cooperation with Carl Ritter from Ghega Institute for “Institut für integrierte Mobilitätsforschung” of university of St. Pölten, we are prowd to present our catenary mast in the press now.
